FONESTAR MSH-883 Mode D'emploi page 6

EN
CONNECTION
SITUATION
Place the receiver on a horizontal surface at a distance of 1m minimum from the floor, walls or metal surfa-
ces.
Keep the equipment away from sources of electric noise, such as lighting fixtures, motors, digital equipment,
etc.
CONNECTION
Connect the audio output to the input on a mixer or amplifier with connection best adapted to your needs:
Using the balanced XLR connector or the unbalanced 6.3 mmmono jack connector. The unbalanced 6.3 mm
mono jack mixed line signal can also be used.
Do not use the 3 outputs at the same time as it could cause signal loss and noise.
Connect the aerials and position them as a V.
Dismountable aerials: Ocassionally the aerials will need to be installed apart from the receiver, to avoid an
obstacle or to use the microphone at a distance from the receiver (auditorium, stadiums, etc.). In this case
we recommend you use 1 aerial cable (for example, mod. CAB-1M) and 1 amplifier and signal splitter (mods.
AMP-800S and DA-868).
- 6 -