Transistor Lynx Mini Vib Manuel D'utilisation page 3

Charging MiniVib
You must charge MiniVib before you can use it. It takes approx.
180 minutes to charge it fully. The battery will then last approx.
four days. Charge the battery fully the first time to obtain the
maximum battery service life.
Insert the
charger:
Disconnect
the charger:
MiniVib on/off
MiniVib is on when supplied (but not charged).
Switching off
Hold down the button for about 6 seconds until the lamp for the
previous alarm goes out. MiniVib vibrates briefly.
Switching on
Hold down the button for about 1 second until the lamp for the
previous alarm comes on. MiniVib vibrates briefly.
Checking whether MiniVib is switched on.
Press the button briefly. When MiniVib is switched on, the pre-
vious alarm comes on and it vibrates once.
How to wear MiniVib
You can, for example, wear MiniVib on your arm or around your
wrist. Check that you can feel the vibrations.
ENGLISH
Connect the charger to
the mains.
Red light comes on
= charging in progress.
Red light flashes
= charging finished.
3