Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Product Overview
1
Power LED
2
PowerLine LED
3
Ethernet LED
4
Reset Button
5
Simple Connect Button
6
Gigabit Ethernet Ports
Simple Connect Button/
7
Reset Button
1
4
5
6
2
3
• Solid: The device is receiving electrical power.
• Blinking: The device is powering up or in power saving mode.
The light will also blink during the Simple Connect process.
• Off: The device is not receiving electrical power.
• Solid: The device is connected to a Powerline network.
• Off: The device has not found any other compatible Powerline
devices using the same encryption key.
The color indicates the Powerline link rate:
• Green: The Powerline link rate is best.
• Amber: The Powerline link rate is better.
• Red: The Powerline link rate is good.
• Solid: The Ethernet port is linked.
• Off: There is no Ethernet connection.
Hold the button for 10 seconds to reset to the factory default
settings.
Press and hold the button for two seconds to secure your
network.
Connect 10/100/1000 Ethernet devices such as routers,
computers, gaming consoles, network storage units, or media
players.
Press and hold the button for two seconds to secure your
network or hold the button for 10 seconds to reset to the factory
default settings.
3
1
7
6
2
3
Publicité
Table des Matières
