Quick Install Guide
PowerLine AV+ 3-Port
Passthrough Adapter
Installation
1
Room 1
Room 2
DHP-P338AV
Existing PowerLine Device
You must have at least two PowerLine devices (including your
DHP-P338AV) for your PowerLine network to function.
Plug the DHP-P338AV into an AC wall outlet. Verify that the
Power LED is lit. If not, insert into another outlet.
Ethernet Port Traffic Priority (QoS)
When connecting devices to your Ethernet ports, be aware of
the Quality of Service (QoS) priorities assigned to each port
Port 1. Has the highest priority and gives uninterrupted service to connected
device that require the highest priority, such as media players or Smart TVs.
Port 2. Has high priority. You can connect devices to this port that require high
priority, such as a game console.
Port 3. Has medium priority and is best suited for networking data devices, such
as a printer.
Technical Support
Having trouble installing your new product? D-Link's website contains
the latest user documentation and software updates for D-Link products.
U.S. and Canadian customers can contact D-Link Technical Support
through our website or by phone.
DHP-P338AV
2
Room 1
Router
Router
Internet
DHP-P338AV
Once the Power LEDs are lit, verify that the PowerLine LED is lit
on both adapters. This indicates that your adapters are properly
connected to each other. If the LED is not lit, insert one or both
adapters into different outlets and repeat step 2.
United States
Telephone: (877) 453-5465
Internet: http://support.dlink.com
Canada
Telephone: (800) 361-5265
Internet: http://support.dlink.ca
Package Contents
PowerLine AV+ 3-Port
Passthrough Adapter
One Ethernet Cable
If any of the above items are missing, please contact your reseller.
Room 2
Router
Internet
Router
Existing PowerLine Device
Installation Tips
1. For best results, use in a standard wall outlet without any other products plugged into the same outlet.
Connecting this product to a power strip or a surge protector may adversely affect the performance of this
product.
2. Avoid using the PowerLine adapters in an electrical outlet that is located near an appliance that uses a lot of
power such as a washer, dryer, refrigerator, microwave, hair dryer, or air conditioning system.
3. Plug the PowerLine adapters in the same room in order to verify whether your home's electrical wiring is
suitable. Once configured you may place the PowerLine adapters to the location of your choice.
©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries
in the United States and/or other countries. Other trademarks or registered trademarks are the property of their respective owners. Maximum throughput
based on theoretical transmission PHY rate. Actual data throughput will vary. Network conditions and environmental factors, including volume of traffic and
network overhead, may lower actual data throughput rate. Interference from devices that emit electrical noise, such as vacuum cleaners and hair dryers, may
adversely affect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer switch, short wave
radios, or other powerline devices that do not follow the HomePlug AV standard. Product specifications, size and shape are subject to change without notice,
and actual product appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.
LEDs (from top to bottom)
Power LED - A solid light indicates that the
device is receiving electrical power.
PowerLine LED - A solid light indicates that
the device is connected to the PowerLine
Network.
LED Colors:
Green - Link rate/quality is the best.
Amber - Link rate/quality is better.
Red - Link rate/quality is good.
Ethernet LED - A solid light indicates that
the Ethernet port is linked.
3
Room 1
Smart TV
Game
Console
Computer
DHP-P338AV
Existing PowerLine Device
You may now attach up to 3 Ethernet devices, such as a NAS, smart
TV, or game console to the DHP-P338AV via Ethernet cables. With
the Ethernet device powered on, verify that the Ethernet LED is lit
on the adapter to indicate a good connection. Setup is complete
Version 1.00(NA) (December 04, 2012) 6HPP338AQ.01G
Room 2
Router
Internet