Victron energy VER Manuel page 11

To display the current VER settings click on VER settings. For example:
Note: These pages are automatically refreshed every 5 minutes.
3.1.1 Changing VER settings with the Web interface.
To configure the VER go to VER Settings and press the corresponding Update button. You will be prompted to enter user name
and password. The default user name is admin with password victron_vrm.
To change the default credentials use VGR Configure software. It is also possible to prohibit updating the VER settings via Web
interface: choose No authentication.
Note: To configure static IP settings with the web interface, first enter the static IP address details, set 'obtain an IP
automatically' to off and after that apply these settings by pressing Update button.
7