Eurotops 41072 Mode D'emploi page 31

T 4780 / MD4780
PART IDENTIFICATION
Button Operations：
Enter measurement mode, press to start
and stop measuring.
Slide to switch between User 1 and User 2.
Enter sound mode.
Enter Alarm mode.
Enter Clock mode.
Enter Average Record mode.
Enter Memory mode.
C. HOW TO USE IT
1) Insert or replace batteries
1. Push the battery cover located on the bottom side on the unit as shown
in the figure.
2. Remove old batteries and insert new ones. Use LR6 or AA alkaline
batteries and use batteries of the same type only.
3. Make sure the battery polarities (+) and (-) match the making on the
battery compartment.
4. Place back the battery door.
NOTE:
• Insert the batteries as shown in the battery compartment. If not, the device will not work or even be damaged.
• When battery power becomes weak, the [ ] icon and "E6" appear in the display, replace all batteries with new ones. Do
not mix old and new batteries.
• Never use rechargeable batteries. This may damage the unit.
• Battery life may vary with ambient temperature and may be shorter at low temperature.
2) TO SET DATE AND TIME
After inserting batteries or press and hold [ ] button in off mode for
5 sec to enter clock mode
1. "Year" will blink on display automatically
2. Press button to select year
3. Press button to confirm and "Month" will blink
4. Press button to select month
5. Press button to confirm and "Day" will blink
6. Press button to select day
7. Press button to confirm and "Hour" will blink
8. Press button to adjust to desired hour
9. Press button to confirm and "Minute" will blink