Safety Instructions - PORTAMIX The Mega Hippo PH1816S Instructions D'utilisation Et De Sécurité

Masquer les pouces Voir aussi pour The Mega Hippo PH1816S:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Mixing Motor Specifications
Model Number:
Rated Voltage:
Power Input:
Rated Current:
Frequency:
Spindle Connection:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Speed One
Speed Two
The EHR 32/2.4P is made in protection class II. For FI-protection purposes the machine can only be run
with a GFCI (PRCD). For this reason, the machine is standard equipped with a PRCD switch integrated in
the cord which allows connecting the unit directly onto the main.

Safety Instructions

• Safe work with the machine is only possible if you read this operating instruction completely and follow
the instructions contained strictly.
• Additionally, the general safety instructions of the leaflet supplied with the tool must be observed. Prior
to the first use, the user should familiarize themselves with the correct operating procedures.
• If the connecting cable is getting damaged or cut during the work, don't touch it, but instantly pull the
plug out of the socket. Never use the machine with damaged connecting cable.
• Do not use the tool in an environment with danger of explosion.
• Do not carry the tool at its cable, and always check the tool, cable and plug before use. Have damages
only repaired by specialists. Only insert the plug into the socket when the tool switch is off.
• Modifications of the tool are prohibited.
• Unplug and switch the machine off if it is not being used e.g.: when attaching or removing the motor or
mixing paddle.
• Switch the machine off if it stops for whatever reason. This way, you avoid that it starts suddenly and not
under supervision.
• Do not use the machine if one part of the housing is damaged or in case of damages on the switch, cable
or plug.
• While working always lead the line cord and extension cord to the back away from the machine.
• Electric tools have to be inspected visually by a specialist in regular intervals.
• Do not touch rotating parts
• During use, the user must wear goggles, ear protectors and protective gloves.
PH1816S - 240 Volt
PH1816S110 - 110 Volt
230V 110V
1800W
1800W
7.9A
50 – 60Hz
M16
II
IP20
6.9KG
EN 55014 and EN 61000
Unloaded/Loaded 220/120RPM
Unloaded/Loaded 670/410RPM
The Mega Hippo
3

Publicité

Table des Matières
loading

Produits Connexes pour PORTAMIX The Mega Hippo PH1816S

Ce manuel est également adapté pour:

The mega hippo ph1816s110

Table des Matières