Inserting or removing a
Playback
media
≥ When inserting a media, ensure that it is facing the right
way up.
≥ When indicator on this unit's display blinks, do not turn off
the unit or remove the media. Such action may result in loss
of the media's contents.
≥ When removing the SD card, press on the centre of the card
and pull it straight out.
≥ If you connect a Panasonic product with a USB connection
cable, setup screen may be displayed on connected
equipment. For details, refer to the instructions for the
connected equipment.
∫ To switch drives
Press [DRIVE SELECT] to select "BD/DVD/CD", "SD card"
or "USB device".
≥ If a media is inserted while the unit is stopped, the drive
switches automatically depending on the inserted media.
8
(8)
VQT2H96
SD CARD
Playing video contents
BD DVD CD
SD
Preparation
Turn on the television and select the appropriate video input
on the television.
1
1
Press [Í] to turn on the unit.
2
Insert the media.
Play starts.
≥ If the menu is displayed, press [3, 4, 2, 1] to select the
item and press [OK].
≥ If play does not start, press [1] (PLAY).
∫ To show menus
You can display Top Menu, DIRECT NAVIGATOR or Pop-up
Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [OPTION] and
selecting "Pop-up Menu".
≥ Signal from PAL discs is output as PAL. Signal from NTSC discs is output
as "NTSC" or "PAL60". You can select "NTSC" or "PAL60" in "NTSC
Contents Output" for NTSC discs.
([FUNCTION MENU] "To Others" "Setup" "Picture")
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [∫] when you have finished playback to protect the unit's motor,
your television screen and so on.
≥ Depending on media and contents, the display may change or may not
appear.
≥ DivX: Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have
been dragged and dropped, copied and pasted to the media.
USB