Bresser MyTime Duo Mode D'emploi page 12

Time with Second › Alarm Clock
Press and hold the SET button for approx. 2 seconds in
either the Clock or the Alarm Clock mode to change the
time or alarm time.
and button (3/4)
Press (3) to increase or
setting when in the setting mode.
Press the button in the alarm clock mode to activate or
deactivate the alarm.
mEm button (6)
Press to toggle between the maximum, minimum and cur-
rent temperature readings.
Set date, 12 or 24 hour display and time
Press and hold the SET button (5) for approx. 2 seconds.
The year mode will blink. Press the
12
(4) to decrease the value of a
(3) to increase or
button (4) to reach the desired year.
Press the SET button again. the month mode will blink.
Press the or button to reach the desired month.
Press the SET button again. The date will begin to blink.
Press the or button to reach the desired date.
Press the SET button again. The 12/24hr mode will blink.
If in 12hr mode the 'PM' indicator will show afternoon
hours. The 'PM' indicator will not show for morning hours.
Press the or button to reach the desired 12hr or 24hr
mode.
Press the SET button again. The hour will begin to blink.
Press the or button to reach the desired hours.
Press SET button again, then minute will blink. Press the
or button to reach the desired minutes.
Press the SET button again to exit setting mode.
Press button in display mode to switch between °C or °F.