Charging Instructions - Memorex MEMOREADY RX600 Mode D'emploi

2700-3000
4000-6000
8000-10000
9V/6F22
100-160
180-250
*High capacity batteries will need 2 or 3 cycles to reach full charge.
How to start an additional charging cycle? After 16 hours of charge,
the 1st charging cycle is interrupted automatically by the safety timer.
The charging LED will go out. Disconnect the plug from the mains and
connect again. Th charge will start a 2nd charging cycle of 16 hours.
Remarks regarding the chart with average charging times :
these are indicative figures as charging time depends on the capacity,
•
age and brand of the battery.
the charging times are based on a full charge of empty batteries.
•

Charging instructions

Step 1. Inserting the NiMH batteries in the charger
Insert 2 or 4 pcs rechargeable NIMH batteries AA/HR6, AAA/HR03, C/
•
HR14, D/HR20 or 1 of 2 pcs 9V/6F22 in the charging compartments
respecting the polarities (+) and (-).
Except for 9V cells, batteries should be charged in sets of 2 or 4.
•
When charging 2 cells, they should be placed side by side both in the
left or right compartments. Charge only cells with the same capacity
(mAh) together.
9V cells can be charged per piece or per 2 pcs. They may be of dif-
•
ferent capacities.
Step 2. Starting the charging process - LED charging lights
After battery insertion, connect the plug of the charger with the 230V
•
mains.
The LED charging lights connected to the 2 left, 2 right and 9V com-
•
partments start burning when batteries are being charged.
Once the average charging time is reached (please check charging time
•
16
2x16*
3x16*
7-10
11-16
14
NL