Diamond HP Media Wonder MP700 Guide De Démarrage Rapide page 5

Connect with TV
Connect with TV' s A/V
Plug the A/V cable (red , white ,yellow) into the TV' s CVBS, Left channel, right channel.
Then plug another end of the cable into U2' s A/V socket.
HD (Component) connect
Plug one end of the YUV video line (green blue and red) on the local Y, Pb/Cb, Pr/Cr. The
other side of the green, red, blue connect with the high-definition TV input (green, blue
and red). At the same time connect AV Video red, white Cable to the machine's left chan-
nel, right channel (audio output), The other end of the red and white lines connect with
TV audio input.
Notice: after connect with TV, it is necessary to verify your media player connections to
your TV are correct.
Please make sure choose the correct the TV signal source after connected with TV. If
there are no images, please click "VIDEO" on the remote control to switch the output
signal until match the television signal.
When your TV can support high-definition input, we recommend that you choose "HD
MODE" to watch.
Operation and Function
Insert the storage device which including file, screen is as follows:
Screen display connected storage devices and set up menu. If multiple storage devices
are inserted at the same time, it will be displayed separately. Press the arrow keys on the
host or remote Control to select storage devices.