Installation - HAMPTON BAY VFB25ACLED1-5 Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation

1
Determine joist width
Measure the distance from the center of the two
ceiling joists where you will be installing the
ventilation fan.
For 12 in. spaced joists, proceed to step 2. For
joist spacing 16 in. – 24 in. proceed to step 3.
NOTE: Sliding hanger bars are provided to allow for
accurate positioning of the main body between joists.
2
12 in. joist installation
Use four long wood screws (BB) to attach the main
body of the fan to ceiling joists in the four locations
shown.
Ensure the main body is level and square to the
joists.
Tighten all screws.
3
Suspension bracket installation
Install suspension brackets (C and D) on one side
of the main body using M4x12 screws (CC).
Install suspension bracket (B) on the opposite side
of the main body using M4x12 screw (CC).
CC
B
C
SHEET 7 TO 8
7
Please contact 1-877-527-0313 for further assistance.
CC
D
www.hamptonbay.com

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

249-872

Table des Matières