Table Des Matières; Safety Information - HAMPTON BAY VFB25ACLED1-5 Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Table of Contents
Table of Contents .......................................................... 2
Safety Information ......................................................... 2
Warranty ......................................................................... 3
Pre-Installation .............................................................. 4
Planning For Successful Installation .......................... 4
Installation Options ..................................................... 4
Tools Required ........................................................... 5
Materials Required ..................................................... 5
Hardware Included ..................................................... 5

Safety Information

1. This ventilation fan is approved for use over a
bathtub or shower when installed in a GFCI
protected circuit. Do not use unapproved fans
over a bathtub or shower that is not approved for
that application.
2. Installation work must be carried out by a
qualified person(s) in accordance with all local
and safety codes including the rules for fire-rated
construction.
3. Always vent fans to the exterior and in
compliance with local codes.
4. Install ductwork in a straight line with minimal
bends.
5. Use 120 V, 60 Hz for the electrical supply and
properly ground the unit. Follow all local safety
and electrical codes.
6. Do not use this fan with any solid-state control
device; such as a dimmer switch. Solid-state
controls may cause harmonic distortion, which
can cause a motor humming noise.
7. To reduce the risk of fire or electric shock, do not
block air entry grill.
 
Package Contents ......................................................... 6
 
Installation ..................................................................... 7
 
Troubleshooting .......................................................... 11
 
Care and Cleaning ...................................................... 12
 
Specifications .............................................................. 12
 
Dimensions .............................................................. 12
 
 
Service Parts ............................................................... 13
VFB25ACLED1-5 Serviceable Parts ....................... 13
 
8. Sufficient air is needed for proper combustion
and exhausting of gases through the flue
(chimney) of fuel burning equipment to prevent
back drafting.
9. Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
10. Not for use in cooking area.
Follow the heating equipment manufacturer's guideline
and safety standards such as those published by the
National Fire Protection Association (NFPA), and the
American Society for Heating, Refrigeration and Air
conditioning Engineers (ASHRAE), and the local code
authorities.
2
SHEE 2 TO 3
Cooking area
Do not install above or
inside this area
Cooking
Floor
Equipment
 
 
 
 
 
 
 
 

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

249-872

Table des Matières