to the battery size.
The LCD screen will indicate "BAD" and the battery icon will flash
•
after ± 20 sec if any battery is unsuitable for charging or defective.
Remove the bad cell.
As long as ALL the batteries are not fully charged, "CHARGE" will
•
be shown.
Any power outage should be avoided during the "CHARGE" function
•
as the safety timer will be reset before the standard program of 6.5
hours has expired.
Step 4. End of the charging process – LCD screen "READY"
The RX 750 will detect when a battery is fully charged. Please check
•
t
e h
a t
e l b
w
t i
t h
To prevent overcharging of the batteries, the safety timer will cut off
the process automatically after 6.5 hours.
The "READY" indication will light when ALL the batteries are fully
•
charged. We recommend to wait for his indication before removing the
batteries from the charger.
Disconnect the plug from the mains first and remove the batteries
•
from the charger when possible and no longer than 24 hours after
charge is completed.
To charge a new set of batteries, please follow the process from
•
Step 1.
Environmental recommendations
Regarding used batteries
The consumer should return used batteries to the dealer's shop or
to the collecting boxes for recycling of batteries placed in stores or
collecting points.
Regarding "waste electrical and electronic equipment" (WEEE)
The equipment that you bought has required the extraction and use
•
of natural resources for its production.
It may content hazardous substances for the health and the
•
environment.
In order to avoid the dissemination of those substances in our
•
environment and to diminish the pressure on the natural resources,
we encourage you to use the appropriate take-back systems. Those
systems will reuse or recycle most of the materials of your end
life equipment in a sound way. Please do not dispose of WEEE as
e h
p a
r p
x o
a .
e v
a r
e g
h c
r a
n i g
t g
m i
e
19
r o f
o y
r u
e r
e f
e r
c n
GB
. e