Controlling The Ptz Camera With A Dvr - FLIR C336ZC1 Manuel D'utilisation

6
Controlling the PTZ Camera
with a DVR
You can connect the PTZ camera to a DVR to control the camera's movement.
FLIR MPX PTZ cameras can accept PTZ commands directly through the co-
axial video cable. There is no need to run RS–485 wiring to use MPX PTZ
cameras.
• The following instructions are based on the M3100 Series DVR. See your MPX DVR's
user manual for instructions on controlling the PTZ camera with your DVR.
• For the latest list of compatible DVRs, please visit
To connect the PTZ camera to a DVR:
1. Connect the camera video cable to one of the Video IN ports on the
system.
2. Right-click and click Main Menu. Enter the system user name (default:
admin) and password (default: 000000) if prompted.
3. Click
4. Under Channel, select the channel your PTZ camera is connected to.
5. Under Control Mode, select HDCVI.
6. Under Protocol, select DH-SDI.
7. Click OK. You can now control your PTZ camera using the system.
#LX400046; r. 2.0/22386/22410; en-US
NOTE
>Setting>Pan/Tilt/Zoom.
www.flirsecurity.com/pro.
11