System Settings; Display Settings - FLIR C336ZC1 Manuel D'utilisation

7
On-Screen Display (OSD) Menu

7.2.1 System Settings

SYSTEM
INFORMATION
ADDR
INFORMATION
SET NORTH
LANGUAGE
FACTORY DEFAULT
RESTART

7.2.2 Display Settings

PRESET
AZIMUTH DISP
POSITION
INSIDE TEMP
#LX400046; r. 2.0/22386/22410; en-US
ADDR
BR
PARITY
PTZ VER
CAM VER
ADDR TYPE
ADDR-HARD
ADDR-SOFT
Set the current viewing angle as the benchmark angle for the
camera.
Set the language for the OSD menu.
Restore the camera system settings to their original, out-of-the-
box state. Exposure settings are not affected when you restore
the camera system settings.
Reboot the PTZ camera. OSD settings are not affected when
you reboot the camera.
ON / OFF
ON / OFF
ON / OFF
• °C
• °F
• OFF
Displays the camera address.
Displays the camera baud rate.
Displays the communication parity.
Displays the PTZ firmware version.
Displays the camera firmware
version.
• HARD
• SOFT
1–255
0–255
18