Askoll eSpro K1 Mode D'emploi page 264

BATTERY AND RECHARGE
Place the battery and charger on a stable surface.
First connect the charger cable to the battery socket,
located under the spring flap. The plug is correctly
inserted into the socket when a "click" is heard.
Then connect the charger to the mains.
Select the desired charging mode, as shown at
the beginning of this chapter in the "BATTERY
CHARGER" paragraph.
First place the charger on the vehicle and connect the
cable with connector to the vehicle socket.
first place the battery charger back on the vehicle
and connect the cable connector to the socket on the
vehicle.
42
eSpro K Rev03 - EN.indb 42 eSpro K Rev03 - EN.indb 42 17/11/2020 11:01:52 17/11/2020 11:01:52