Motor Enable - Askoll eSpro K1 Mode D'emploi

USE

Motor enable

The engine must be enabled to start.
To enable the engine, insert the key into the switch
and turn it to , then press for 3 seconds to enable
the engine, motion warning light will turn on.
To disable the engine, press the engine enabling
button again for 3 seconds and turn the key in the
ignition switch to the left on
The engine will be disabled also by rotating the key
to .
22
eSpro K Rev03 - EN.indb 22 eSpro K Rev03 - EN.indb 22
eS K1/K2
pro
.
eS 70 K1
pro
17/11/2020 11:01:27 17/11/2020 11:01:27