Grant Optima TX150 Mode D'emploi page 23

Segment 001:
Target temperature

Pump Speed
Duration (hh:mm) 
Relay
Off
Segment 001:
Target temperature

Pump Speed
Duration (hh:mm) 
Relay
Off
Segment 001:
Target temperature

Pump Speed
Duration (hh:mm) 
Relay
Off
Program
001: Ends 00:10
Insert after
TX150 & TXF200
Operating Manual
6. Rotate the dial to highlight pump speed, press S
°c
 
to select
.
°c
7. Rotate the dial to the desired pump speed (1 to 5).

.
Press S to set.

:
Save
8. Rotate the dial to highlight duration, press S to
°c
 
select.
.
°c
9. Rotate the dial to define the duration of the first

.
segment (hh:mm). Minimum segment duration is
1 minute, maximum 99 hrs 59 mins. Press S to
set.

:
Save
10. Rotate the dial to highlight relay, press S to select.
°c
 
.
11. Rotate the dial to toggle between on/off. Press S
°c
to select.

.
12. Highlight save to store segment 1.

:
The program screen is displayed.
Save
13. To insert a new segment, highlight segment 1,
°c
 
press S. Rotate the dial to display insert after,
.
press S to select.
Segment 2 screen is displayed. Repeat steps 4 to
12 to create a new segment.
To dwell for a period at a particular temperature,
set the temperature to the same value as the
previous segment and then set the time to the
required dwell period.
14. On completion of programming, press F twice to
return to the home screen.
www.grantinstruments.com
EN
30424 V3
Page 22