Installation - Caso Germany Wine Duett Mode D'emploi

Installation

Before using your wine refrigerator:
•
Remove the exterior and interior packing
•
Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
•
Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded.
•
To level your appliance, adjust the front legs at the bottom of the appliance.
The handle installing
•
The wine cooler comes with 1 metal stainless steel handle. To install simply screw them to the door
with the supplied screws
• Foe recessed installation away from direct sunlight and sources of heat (stove, heater, radiator,
etc.).Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold or hot ambient temperatures may also cause the appliances not to perform
properly.
• Designed for use inside the home.
screw
12
handle