Intended Use; For Your Safety - LUCTRA 9235 Mode D'emploi

Intended use

The lamp is designed for lighting a workplace in dry indoor rooms (ambient temperature of
25 °C).
Perform only the activities described in this user manual. Any other use constitutes unauthor-
ised misuse. The manufacturer accepts no liability for damage resulting therefrom.

For your safety

Basic safety instructions
• The user must have read and understood this user manual before starting to use the lamp
to ensure safe handling.
• Observe all safety instructions! You put yourself and others at risk if you disregard these
instructions. Retain this user manual for future reference and always keep it within easy
reach.
• If you ever sell or pass on the lamp, please ensure that you also hand over this user manual.
• Use this lamp only if it is in perfect working order. Please contact our service team if the
lamp or a part thereof (including the LEDs) are faulty.
• This lamp is not designed to be used by persons with limited physical, sensory or mental
capabilities or a lack of experience and/or knowledge unless they are supervised by a
person responsible for their safety or have received instructions from them on how to use
the lamp.
• Make sure that children do not play with the lamp.
• Always observe the valid national and international safety and health regulations and work
directives.
Electrical safety
• Only plug the lamp into earthed sockets that have been properly installed, earthed and
tested.
• Make sure that the power supply corresponds to the connection data for the lamp before
plugging in the lamp.
• Do not touch the power plug wit wet hands! Always grasp the plug and not the cable to
pull the plug out of the socket.
• Do not bend, crush, tug or run over the power cable. Protect it from sharp edges, oil and
heat.
• Do not lift the lamp by the cable.
• Check the plug and cable before each use.
• Pull out the power plug immediately if the power cable is damaged. Never use the lamp if
the power cable is damaged.
• Always switch off the lamp before removing the plug.
• Always pull out the power plug immediately if the lamp is not used for a longer period of
time.
• Always pull out the power plug before transporting or repositioning the lamp.
• Only use extension cables that are suitable for the lamp and its surroundings.
• Do not use additional dimmers.
• If the power cable on the lamp is damaged, it must be replaced by the manufacturer to
avoid any risk of danger.
Product-specific safety instructions
• Do not cover the lamp with cloths or other objects. This may cause a fire hazard.
EN
English
LUCTRA | 15