TP-Link TL-WA901N Consignes D'installation page 11

Configure the AP Device
3. Launch a web browser and enter http://tplinkap.net. Create a password to log in.
4. Click Quick Setup, select your corresponding mode and click Next. Follow the step-by-step
instructions to complete the configuration.
5. Now, reconnect your devices to the AP device.
Note: In Client mode, only the wired connected devices can enjoy the internet surfing.
In Multi-SSID mode, connect your wireless devices to the different Wi-Fi networks to be isolated by VLANs.
Power on via PoE Injector
Power the device with the included passive PoE injector when the device is located far from a power outlet.
Note: The passive PoE injector supports a cable length up to 30 meters due to the environment.
Internet
Existing Router
TL-WA901N's SSID
Passive PoE Injector
English
9