Before You Start - TP-Link TL-WA901N Consignes D'installation

English
Note: TL-WA901N is used for demonstration in this installation guide.

Before You Start

Which mode do you need? Please refer to the table to choose a proper mode.
You want to convert your wired (Ethernet) network to a wireless network.
You are in a Wi-Fi dead-zone or a place with weak wireless signal. You
want to have a greater effective range of the wireless signal throughout
your home or office.
You have a wired device with an Ethernet port and no wireless capability,
for example, a Smart TV, Media Player, or game console. You want to
connect it to the Internet wirelessly.
You want your devices connected to different wireless networks and
isolated by VLANs.
Connect the AP Device
1. Connect the AP device according to steps in the diagram.
2. Turn on the power, wait until the Power (
default SSID and Password printed on the product label to join the AP device's Wi-Fi network.
Note: For a dual-band AP device, both the 2.4GHz and 5GHz Wireless (
6
Scenarios
) and Wireless (
Operating Modes
Access Point Mode (Default Mode)
Range Extender Mode
Client Mode
Multi-SSID Mode
) LEDs are lit and stable, and use the
) LEDs should be lit and stable.