EN
User Manual
Dual USB chargers
1
Safety Instructions
1.1
General
•
Read the user manual completely and carefully before use.
The user manual is part of the product and contains important informati-
on for correct use.
•
Keep this user manual.
The user manual must be available for uncertainties and passing the
product.
Notes for network separation
The product has no power switch and may be used only in easily accessible outlets
to quickly remove it in an emergency and after use.
•
Voltage-free only when the plug is pulled.
•
In case of emergency, during thunderstorms and after use,
pull the pro duct on its plug housing!
•
Do not open the housing.
•
Do not let the product unattended in use.
•
Only let a trained electrical engineer do installation, disas-
sembling, maintenace and repairing work.
•
Compare the specifications of product, power supply and
peripherals. These must be identical.
•
Not meant for children.
•
Do not repair defective products by yourself, but contact the
dealer or producer.
•
Do not modify or alter product nor accessories.
•
Avoid stresses such as heat and cold, moisture and direct
sunlight, vibration and mechanical pressure.
•
Only use in dry ambience.
•
Risk of injury by stumbling and falling
1.2
Warning levels
Warnings against hazards that may result in injuries in case
of non-observance.
Warnings against hazards that may result in material
damage in case of non-observance.
2
Description and Function
2.1
Travel chargers
This product is a USB charger for charging and operating with mobile devices by
model-specific plug to USB. It transforms mains voltage into individual low voltage.
Fig. 3: Travel chargers
2.2
Scope of delivery
USB charger, user manual
3
Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4
Preparing
•
Compare voltage, mains voltage and frequency of product
and mains.
•
Do not overload the product and attend to its name plate.
5
Connecting and Operating
Risk of injury by stumbling and falling
•
Ensure safe cable laying.
1.
Connect a mobile device to the plug-in charger via USB
cable.
2.
Plug the travel charger into a mains socket.
3.
Unplug all connections after use.
USB cables are not included.
The product contains no operating elements to handle during use.
USB-A
Fig. 4: Connecting and Operating
REV2017-04-07
V2.0
6
Tab. 2: Specifications
7
The products are maintenance-free.
8
9
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622
10
100-240 V~
- 2 -
71556, 45173, 71555, 45174
Specifications
Connectors
Input
100-240 V~, 50/60 Hz, 0.4 A max.
Output
is automatically set to your devices
Output power
Protection level
Protection class
Dimensions
Weight
Article Number
71556
Packing
Box
Colour
Maintenance and Cleaning
Material damage
•
Clean only with a dry, soft cloth.
•
Do not use cleaning agents and chemicals.
•
Store cool and dry.
•
Store the product out the reach of children and in a dry and
dust-protected ambience when not in use.
•
Keep and use the original packaging for transport.
Liability notice
We reserve the right to printing errors and changes to product, packaging
or product documentation.
•
See our terms of warranty. These are available in their current
form under the given contact details.
Disposal Notes
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami
native and hazardous substances can pollute our environment.
EU Declaration of Conformity
Goobay
®
With the CE sign,
, a registered trademark of the Wentronic
GmbH ensures, that the product is conformed to the basic European
standards and directives.
by Wentronic GmbH | Pillmannstraße 12
EURO plug, USB-A socket
Device identification = QC3.0:
3,2-20 V
(dynamic - max. 5 A)
Device identification = QC2.0:
5 V
, 2 A /
9 V
, 1.66 A /
12 V
, 1 A
Device identification = QC1.0:
5 V
, 2 A
needs by ID Chip (max. 15 W)
IP20
2
80 x 40 x 25 mm
40 g
45173
71555
45174
Bag
Box
Bag
Goobay
38112 Braunschweig | Germany
®