Eaton Protection Station 500 Manuel D'installation Et D'utilisation page 9

Fehlerbehebung
(Weitere Informationen unter www.eaton.com oder bei Ihrem EATON-Kundendienst)
Problem
1
The battery backup outlets 6
◗
are not supplied with power.
2
The connected devices are not
◗
supplied when AC power fails.
3
AC power is available, but
◗
the UPS operates on battery
power.
4
The filtered outlets 7 are not
◗
supplied.
5
Green button 8 flashes:
◗
- frequently.
-every 5 seconds
-every 2 seconds
-continually and the audio
alarm beeps
6
Green button 8 is on and the
◗
audio alarm beeps every
1 second.
7
Green button 8 is off and the
◗
audio alarm beeps every
1 second.
8
Green LED 9 is off
◗
The telephone line is
9 ◗
disturbed or modem
access is not possible.
Diagnostic
Button 8 is not pressed.
◗
The devices are not connected to
◗
the battery backup outlets 6 .
Circuit breaker 10 , has been
◗
tripped by an overload on the UPS
output.
The wall outlet is not supplied.
◗
Circuit breaker 10 , has been
◗
tripped by an overload on the UPS
output.
The UPS frequently operates on
◗
battery power because the AC
power source is of poor quality
The UPS operates on battery
◗
power, beginning of battery backup
time
The UPS operates on battery
◗
power, end of battery backup time.
The UPS battery backup outlets 6
◗
are overloaded.
The battery has reached the end of
◗
its service life.
A fault has occurred on the UPS.
◗
The battery backup outlets 6 are
no longer supplied.
Surge protection is no longer
◗
provided.
Surge protection on the telephone
◗
line is no longer provided.
Solution
Press button 8 and check that it
◗
turns green.
Connect the devices to the battery
◗
backup outlets 6 .
Disconnect excess equipment
◗
and reset the circuit breaker 10 by
pressing the corresponding button.
Supply power to the wall outlet.
◗
Disconnect excess equipment
◗
and reset the circuit breaker 10 by
pressing the corresponding button.
Have the electrical installation
◗
checked by a professional or use
another wall outlet.
Disconnect excess equipment
◗
connected to the battery backup
outlets 6 .
��
Have the battery replaced.
◗
��
Call after-sales support.
◗
Call after-sales support.
◗
Disconnect the telephone line from
◗
the wall outlet.
Call after-sales support.
◗
9