Beta 1871M Mode D'emploi page 37

3d - FILTER CARTRIDGE
• You can also wash the filter element directing the jet of water from the
inside to the outside.
Before refitting the filter element, make sure it is perfectly dry.
Replace only the filter element if worn.
Filter element wet. Handle with care!
4d - CLEANING THE DRUM
• Check the amount of vacuumed debris.
• Empty the drum when it is half full.
• Dry off the drum and accessories after vacuuming
liquids.
5d - REPLACING THE POWER CORD
Contact an authorized technical service center (see
attached list) if the power cord has been damaged, since
special tools are needed to replace it.
EN
NO!
C.A.T.
37