Proper Use - Beta 1871M Mode D'emploi

PROPER USE

1c -ATTACHING THE FLEXIBLE HOSE
• Insert the sleeve of the flexible tube (u) to the air
entrance connection (r).
2c - FOR USE AS A WET VACUUM
Always remove the filter element and if using,
the filter-bag.
Use the foam-filter.
• When the vacuumed liquids reach the maximum level
inside the drum, suction is automatically cut off by the
safety float.
The user is alerted by an increase in the rpm rate of the
motor and by the lack of suction.
Turn off the appliance immediately and empty the drum.
To empty the drum, see paragraph "4d".
3c - TO VACUUM LARGE QUANTITIES OF LIQUID
• To ensure partial air flow, make sure that the crevice tool
is never fully submerged.
34
r
u
H O
2