Faucets And Fittings; Project Requirement Summary - Kohler K-1000-H2 Guide D'installation

Faucets and Fittings

Because the system recirculates water, this installation requires the addition of a bath and shower
faucet to fill the basin and for personal cleansing. We recommend the K-1099 single control faucet or
the K-1098 two-handle faucet. Talk to your distributor for additional information.

Project Requirement Summary

Room size
Water depth
Footbath basin capacity
Threshold height
Suction height from finished floor
Suction cover diameter
Distance from pump box to tower
Distance from suction to heater (and
pump box)
Air space around pump box
Finished wall thickness
Finished floor thickness
PVC pipe and basin floor pitch
1030200-2-C
Minimum
16 sq ft (1.5 sq m). 47" (119.4 cm)
x 50" (127 cm)
3" (7.6 cm) above top of suction
cover
90 gallons (341 L)
6" (15.2 cm) above top of suction
cover
2-1/2" (6.4 cm) to center
4-1/4" (10.8 cm)
None
12" (30.5 cm)
32 cu ft (.9 cu m)
3/4" (2 cm)
1/2" (1.3 cm)
1/4" (6 mm) per foot (30.5 cm)
12
Maximum
32 sq ft (3 sq m). 50" (127 cm) x
92" (233.7 cm)
4" (10.2 cm) above top of suction
cover
200 gallons (757 L)
7" (17.8 cm) above top of suction
cover
3-1/2" (8.9 cm) to center
4-1/4" (10.8 cm)
36" (91.4 cm) due to cable length
48" (122 cm) to permit drainage
None
1-3/4" (4.4 cm)
1-1/2" (3.8 cm)
1/2" (1.3 cm) per foot (30.5 cm)
Kohler Co.