Conceptronic C300BRS4A Mode D'emploi page 45

ENGLISH
6.2 WPS – Pin Code technology
If your WPS enabled Wireless Client does not have a (virtual) Push Button, you can use the Pin Code
technology to establish a WPS connection.
Note: To activate the WPS Pin Code feature, you need a computer which is wired connected to the
C300BRS4A.
A. Start your web browser (like: Internet Explorer, FireFox or Safari).
B. Enter the IP address of the device in the address bar of your web browser (By default:
http://192.168.0.1/).
The Login page of the C300BRS4A will be shown.
C. Enter the Username and Password (Default: 'admin' & 'admin') and click "Submit" to enter the
configuration pages.
When the Username and Password are correct the router will display the "Device Settings" overview.
D. Select "Wireless" in the left Menu.
The Wireless Configuration pages will be shown. At the bottom of this configuration page, you can find the
"Wi-Fi Protected Setup" section.
E. Click the "Add Wireless Device Wizard" button on the screen.
C
45
C
E