Télécharger Imprimer la page

Olymp LavaSit DINER Shiatsu Mode D'emploi page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
b. Mains cable (230V/50Hz AC)
• The massage motors are plugged into a cover protected socket supplied by the customer via a
transformer/control unit with an external power cable.
• Optional: Cable conduit for floor anchoring (fig. 7) to reduce risk of tripping. Lay the power
supply cable from the shampoo unit through the conduit to the socket.
• If the shampoo unit is wall mounted (input and output water via installation shaft from the wall),
the power supply cable can be laid to the wall in the installation shaft and be plugged into a wall
socket there.
• When several units are installed in-line the power supply cable of one unit must not
be connected further to another unit!
Environment:
For the correct disposal of this product, special national regulations or ordinances may apply. Please observe
these regulations carefully.
Voltage:
Europe
Power input:
Device in protective class:
EU conformity:
Certification:
GB
230 V / 50 Hz
60 W
1I
The washing unit complies with the regulations as under the low-voltage
regulations 98/79/EG and the regulations governing electromagnetic
compatibility 89/336/EWG.
CE conformity identification
4

Publicité

loading