Samsung UBD-M9500 Mode D'emploi page 4

• THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS AND DO
NOT REPAIR YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
This product satisfies CE regulations when shielded
cables and connectors are used to connect the unit
to other equipment. To prevent electromagnetic
interference with electric appliances, such as
radios and televisions, use shielded cables and
connectors for connections.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
If the Region number of an Ultra HD Blu-ray
✎
Disc/Blu-ray Disc/DVD does not correspond to
the Region number of this product, the product
cannot play the disc.
IMPORTANT NOTE
The mains lead on this equipment is supplied with a
molded plug incorporating a fuse. The value of the
fuse is indicated on the pin face of the plug.
If it requires replacing, a fuse approved to BS1362 of
the same rating must be used.
Never use the plug with the fuse cover omitted if
the cover is detachable. If a replacement fuse cover
is required, it must be of the same colour as the pin
face of the plug. Replacement covers are available
from your dealer.
If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to reach
a power point, you should obtain a suitable safety
approved extension lead or consult your dealer for
assistance.
However, if there is no alternative to cutting off the
plug, remove the fuse and then safely dispose of
the plug. Do not connect the plug to a mains jack, as
there is a risk of shock hazard from the bared flexible
cord.
To disconnect the apparatus from the mains, the plug
must be pulled out from the mains socket, therefore
the mains plug shall be readily operable.
The product unit accompanying this user manual is
licenced under certain intellectual property rights of
certain third parties.
4 English