Electrical Connector; Installation Of The Outside Unit; Installation Of The Wall Mounting Brackets; Attaching The Outside Unit - WINEMASTER FONDIS SP 100 Mode D'emploi

Two wrenches 1 & 2 are supplied with the unit.
-
Maintain the connection with the wrenche 1and unscre with the wrenche 2.
-
Attention : don't stop unscrewing while gas leaks until the 2 elements are separated.The gas leak will stop
then ! Before and during remounting operations, protect the end of the flexible connection in order to avoid
dust goes out.
3.2.4

ELECTRICAL CONNECTOR

The ventilator of the outside unit is connected by an electric cable.
Disconnect the connector 3.
3.3

INSTALLATION OF THE OUTSIDE UNIT

3.3.1

INSTALLATION OF THE WALL MOUNTING BRACKETS

150mm
300mm
3.3.2

ATTACHING THE OUTSIDE UNIT

Before attaching the outside unit, position two nylon washers 1 in the brackets holes.
1
Ø10mm
443mm
10