Installation Declaration - Leister SILENCE Notice D'utilisation

Installation declaration

(in terms of the EC machinery directive 2006/42; Appendix II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares the partly
completed machinery
Designation:
Type:
– as far as it is possible from the scope of supply – fulfi lls the applicable essential requirements of the EC machinery
directive (2006/42/EC).
The partly completed machinery furthermore complies with the provisions of the following EC directive(s):
EC directive(s):
Harmonised standards:
In addition, we declare the relevant technical documentation for this partly completed machinery is compiled
in accordance with Annex VII (part B) and will be electronically transmitted to national authorities in response
to a reasoned request. Authorised documentation representative: Volker Pohl, Manager Product Conformity
The partly completed machine must not be put into service until the fi nal machinery into which it is to be
incorporated has been declared in conformity with the provisions of the EC machinery directive (2006/42/
EC), where appropriate.
Kaegiswil, 11.12.2014
Entsorgung
Power tools, accessories and packaging should be recycled. For EU countries only: do not
dispose of power tools in your household rubbish! According to the European Directive 2002/96
on waste electrical and electric equipment and its implementation in national law, power tools
which can no longer be used must be collected separately and recycled.
Blower
SILENCE; ASO
Electromagnetic Compatibility 2004/108
Low Voltage Directive 2006/95
RoHS Directive 2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3,
EN 62233, EN 60335-2-80, EN 50581
Bruno von Wyl, CTO Andreas Kathriner, GM
11