- EN -
2
Safety information
2.1
Electrical connection
Special regulations apply for electrical installation in outdoor spaces. Only a qualified electrician may
•
perform the electrical installation.
– The qualified electrician has the necessary professional training, knowledge and experience to
perform electrical installation in outdoor spaces. The electrician can detect potential dangers and
knows how to adhere to regional and national standards, regulations and directives.
– For your own safety, please consult a qualified electrician.
Only connect the unit if the electrical data of the unit and the power supply match.
•
Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated fault current
•
of max. 30 mA by means of a fault current protection device.
Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use (splash-
•
proof).
Protect the plug connection from moisture.
•
2.2
Safe operation
Never operate the unit if the housing is defective!
•
Never operate the unit if an electrical cable is defective!
•
Do not carry or pull the unit by its power cable.
•
Route lines in such a way that they are protected from damage and do not present a tripping hazard.
•
Never carry out technical changes to the unit.
•
Only carry out work on the unit that is described in this manual.
•
Only use original spare parts and accessories for the unit.
•
20