Installation
Electrical connection
READ THE SAFETY RULES CAREFULLY BEFORE
CONNECTING THE APPLIANCE.
THE INSTALLATION MUST COMPLY WITH THE
STANDARDS IN FORCE IN THE COUNTRY OF
INSTALLATION (THE CURRENT IET WIRING
REGULATIONS (BS7671) FOR UK).
CHECK THAT ALL THE WIRES IN THE TERMINALS
IN THE WALL CONNECTION BOX ARE CORRECTLY
CONNECTED.
WITH USE OF THE CONTROL WIRE
Appliance
connection
cable
WITHOUT USE OF THE CONTROL WIRE
Device
connection
cable
Note: The programming orders are transmitted by the above
signals, measured in relation to neutral.
Respect the direction of connection:
BROWN = PHASE,
BLUE or GREY = NEUTRAL,
BLACK = PILOT WIRE
The black wire must NEVER be connected to an earth
terminal or to the GREEN / YELLOW wire.
195279_s1_s1_3663602437277_GOODHOME_A5_IM_Multi_V09.indb 46
195279_s1_s1_3663602437277_GOODHOME_A5_IM_Multi_V09.indb 46
N (blue or grey)
P (brown)
Pilot wire (black)
N (blue or grey)
P (brown)
Pilot wire (black)
Neutral
230 V~
mains
Phase
Pilot wire (central)
Neutral
230 V~
mains
Phase
13-05-2020 12:55:36
13-05-2020 12:55:36
46