Kingfisher GoodHome Florya Mode D'emploi page 39

Safety
WARNING: To
prenvent overheating,
do not cover the
appliance.
• If the supply cord
is damaged, it must
be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
• If the appliance is
covered, there is a risk of
overheating. The above
logo warns of this risk.
• Consequently it is strictly
prohibited to cover or
obstruct the air inlet or
outlet vents as this could
cause incidents or damage
the appliance.
• Take care not to introduce
anything into the appliance.
• The electrical connection
of this appliance must be
195279_s1_s1_3663602437277_GOODHOME_A5_IM_Multi_V09.indb 39 195279_s1_s1_3663602437277_GOODHOME_A5_IM_Multi_V09.indb 39
performed by a qualified
person with the power
disconnected.
• All work on these
appliances must be
performed by qualified and
approved personnel with
the power disconnected.
• Make sure that the power
supply line is fitted with
a sectioning switch to
isolate the appliance,
and the control wire if
fitted, from the electricity
mains according to the
regulations in force.
• The installation must
include a multi-pole circuit
breaker with a contact
opening distance of at least
3 mm.
CAUTION - In order to avoid
a hazard due to inadvertent
resetting of the thermal
cut-out, this appliance must
not be supplied through
an external switching
device, such as a timer, or
connected to a circuit that
is regularly switched on and
off by the utility.
39
13-05-2020 12:55:35 13-05-2020 12:55:35