Reset Unit - Atmor Thermo Pro2 Série Manuel D'instructions

14. Reset Unit

As with all electrical appliances, it is crucial to first shut off all power to the unit directly at the fuse or breaker box before
attempting to reset this water heater.
WARNING: SERIOUS BODILY INJURY OR DEATH COULD OCCUR IF YOU IGNORE THIS WARNING.
Locate the four reset button locations as shown below and press all buttons. If you hear a "click," the unit has reset. If
you find that the unit needs to be reset quite often, please call our customer service for further assistance. Proceed to
turn on your breakers and power on the unit.
18kW
24kW, 29kW
36kW
18