Using Extension Cords; Storage And Maintenance - Westinghouse ST SWITCH Manuel Utilisateur

OPERATION

USING EXTENSION CORDS

Using damaged or frayed extension cords could result in death or serious injury
It is recommended to use no longer than a 30ft extension cord for utility power. The cord must have a ground and
cannot be damaged or frayed.
NEED LONGER GENERATOR CORDS?
Never move generator closer to home to compensate for cords/cables being too short. Only use
Westinghouse power cable extenders for proper operation. Never use longer than 50ft total of
generator control or power cables as it may affect performance.
Westinghouse offers extension cords for generator power input cord and generator control cable. Part numbers are
below:
Part Number
3021225C
STCORD25

STORAGE AND MAINTENANCE

Always store in a dry location away from any flammable liquids or materials. Do not store in
temperatures lower than 50
Be sure to test the ST Switch every 6 months to make sure the unit is in good working order.
WARNING
WARNING
Description
25' Generator Power Input Cord: 30A 120V L14-30P to L14-30R
25' Generator Control Cable: 7 Pin ST Outlet Connector
WARNING
F and higher than 95
o
F
o
15