Installing The Wireless Controller - PURE Highway 400 Mode D'emploi

Installing the wireless controller

1. Slide the back cover off of the wireless controller and insert the batteries, then
replace the cover.
2. Choose an area on your vehicle's dashboard where you want to install the wireless
controller. Clean the surface with a cleaning cloth and wait for it to dry.
Make sure the wireless controller does not obstruct the view of the driver.
3. Peel off the backing from the wireless controller bracket and gently stick it onto your
dashboard. Gently press the bracket to ensure it's attached securely.
4. Slide the wireless controller onto the bracket, until it clicks into place.
11