Installing Attachments; Tips And Tricks; Using The Pet Hair Turbine Tool; Using The Bare Floor Nozzle - LG Luv400T Manuel Du Propriétaire

OPERATION

Installing Attachments

Using the crevice tool:
Slide the crevice tool over the end of the wand or fit
it into the handle.
Using the Extended Crevice tool
To use the extended crevice tool place the
extension onto the crevice tool by sliding onto the
crevice tool until it has locked into position. This will
give you a longer extension for hard to reach areas.

Tips and Tricks

Carpet Edges and Corners:
For tight corners, carpet edges and along base
boards, use the dusting brush.
Use the crevice tool for especially hard to reach
areas.
Use the crevice tool for hard to reach places such
as tight corners and base boards.
14

Using the Pet Hair Turbine Tool

The Pet hair turbine tool attaches to the wand like
the other attachments. It features a turbine-powered
agitator to provide extra cleaning power on carpets
and fabrics. It is great for cleaning stairs, cushions
and vehicle upholstery.
When using the Pet hair turbine tool, check
frequently for the buildup of hair, fibers, lint and
other debris in the brush area.
Excessive buildup can reduce performance and
could damage the Pet hair turbine tool. See the
Care and Cleaning section for cleaning instructions.

Using the Bare Floor Nozzle

The bare floor nozzle attaches to the wand like the
other attachments and should be used on
hardwood and tiled floors.