PUR PQC3RO Manuel Du Propriétaire page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Performance Data Sheet (continued):
The PQC3RO and the PQC4RO have been tested and certified by NSF International according to NSF/ANSI 42, 58 and CSA B483.1.
The PQC5RO has been tested and certified by NSF International according to NSF/ANSI 58 and CSA B483.1 for the reduction of the
substances listed below.
The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the
permissible limit for water leaving the system, as specified in NSF/ANSI 58. While testing was performed under standard laboratory
conditions, actual performance may vary.
Performance Claims for PQC3RO, PQC4RO and PQC5RO
Substance
NSF Standard 42
Chlorine
(PQC3RO & PQC4RO post filter only)
Particulate Class III
(PQC3RO & PQC4RO post filter only)
NSF Standard 58
Arsenic (Pentavalent)
Barium
Cadmium
Chromium (Hexavalent)
Chromium (Trivalent)
Copper
Fluoride
Lead
Radium 226/228
Selenium
TDS
Cyst
Turbidity
Daily Production Rate: 20.3 gpd
Efficiency:
14.97%
2
Recovery:
27.81%
3
Tested by NSF International according to NSF/ANSI Standard 42, 58 and CSA B483.1.
1
Efficiency rating means the percentage of the influent water to the system that is available to the user as reverse osmosis treated water under operating
2
conditions that appropriate typical daily usage.
Recovery rating means the percentage of the influent water to the membrane portion of the system that is available to the user as reverse osmosis
3
treated water when the system is operated without a storage tank or when the storage tank is bypassed.
Manufactured and warranted by GHP Group Inc.
USA: 6440 W. Howard St. Niles, IL 60714-3302
Canada: 271 Massey Rd. Guelph, Ontario, N1K 1B2
Average Influent
Maximum Allowable
Challenge
Product Water Level
Concentration
2.0 mg/L ± 10%
10,000/mL
0.30 mg/L ± 10%
0.010 mg/L
10.0 mg/L ± 10%
2.0 mg/L
0.03 mg/L ± 10%
0.005 mg/L
0.30 mg/L ± 10%
0.10 mg/L
0.30 mg/L ± 10%
0.10 mg/L
3.0 mg/L ± 10%
1.3 mg/L
8.0 mg/L ± 10%
1.5 mg/L
0.15 mg/L ± 10%
0.010 mg/L
25 pCi/L ± 10%
5 pCi/L
0.10 mg/L ± 10%
0.05 mg/L
750 ± 40 mg/L
187 mg/L
≥ 50,000 /mL
11 ± 1 NTU
0.5 NTU
Percent Reduction
Product Water Level
Requirement
≥ 50%
≥ 85%
0.007 mg/L
0.43 mg/L
0.0014 mg/L
0.009 mg/L
0.010 mg/L
0.1 mg/L
0.4 mg/L
0.005 mg/L
5 pCi/L
0.002 mg/L
25 mg/L
99.95%
< 0.1 NTU
Tested Performance
Percent Reduction
1
1
91.8%
99.9%
99.2%
97.6%
98.1%
98.5%
96.7%
98.7%
95.7%
96.6%
80%
97.9%
96.7%
99.99%
> 99.1%
16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pqc4roPqc5ro

Table des Matières