Introduction; Safety Instructions; Compatibility; Installing Your New Power Supply - BE QUIET! STRAIGHT POWER 11 1000W Mode D'emploi

1.

INTRODUCTION

We are delighted that you have chosen to use a be quiet! power supply from our Straight Power 11 series in your
PC� Please read and follow all the information contained in these instructions carefully prior to installation�
Should you have any further question, please contact our customer service� See contact information in item
Manufacturer's details�
2.

SAFETY INSTRUCTIONS

The power supply is only guaranteed to function properly if the instructions are followed�
Caution: Only use the supplied cable set� Using cables that were not included (e�g� cables of older
power supply unit series) may lead to defects!
Never open the power supply case� The electronic components inside the case generate a high voltage that is
dangerous to humans� Even after disconnecting the power supply from the network, some parts still have high
voltages� For this reason, a power supply adapter should only be opened by an authorised technician�
Opening the device voids your warranty.
∙ Never handle the power supply with wet or damp hands when in operation�
∙ Never insert objects into the power supply's apertures/fans�
∙ Note that the power supply is designed for use indoors in conditions without high levels of moisture in the
ambient air� Using the power supply outdoors will lead to serious damage�
∙ Never work on the power supply while it is connected to the mains� In this case, always set the power switch
to "0" and / or disconnect the power plug�
∙ In the event of a short circuit in the device, unplug the mains cable and do not use the device�
Make sure that your PC is not located directly next to a heating system or any other source of heat�
Make sure that your computer case is sufficiently ventilated by means of additional fans; with today's complex
and powerful systems a power supply is incapable of dissipating the heat produced in the PC case without
additional support�
If you want to clean your power supply, disconnect it completely from the mains and never use a damp cloth or
cleaning agent� Clean the power supply from the outside using a dry cloth�
Before using the power supply, allow it to warm up to room temperature for one hour to prevent condensation
accumulating in the power supply�
3.

COMPATIBILITY

The be quiet! Straight Power 11 series power supplies are compatible with all recent popular power supply and
motherboard specifications such as:
∙ Intel ATX12V Power Supply Design Guide Version 2�4 (and downwardly compatible to V2�31, V2�3, V2�2,
V2�01, V2�0 )
∙ ATX System Design Guide Version 2�2 and Version 2�1
∙ BTX Version 1�0a
∙ E-ATX Server Dual Motherboards via 8-Pin Connector
∙ EPS12V Version 2�92
∙ Intel C6/C7 Status for the new processor generation
∙ Energy Star 6�1 guidelines
∙ ErP ready
4.

INSTALLING YOUR NEW POWER SUPPLY

Please read „Safety instructions" before you begin the installation�
Note: You will need a screwdriver to fit the power supply in your PC. Only use the screws provided with the
power supply because they have the correct thread�
5