Teac MC-DX32i Manuel Du Propriétaire page 19

3 Press the Skip button (.or/) repeatedly to select a
track, then press the MEMORY button.
track number program number
The track is programmed, and the next program number (P-
02) is displayed.
< Repeat this step to program more tracks.
< You can program up to 32 tracks.
4 When the selection of track numbers is completed,
press the Play/Pause button (G/J) to start programmed
playback.
< When the playback of all the programmed tracks has finished,
or if you press the Stop button (H), the MEMORY indicator
will go off and the program mode will be cancelled. Still the
program is retained in memory.
You can return to the programmed playback by pressing the
MEMORY button and the Play/Pause button (G/J).
< Shuffle function doesn't work during programmed playback.
To check the programmed order
In the stop mode, press the MEMORY button repeatedly. The
track number and program number will be shown on the
display.
To add a track to the end of the program
In the stop mode, press the MEMORY button repeatedly until
"- -" appears on the display. Select a track number using the
Skip button (. or/ ) and then press the MEMORY
button. The track is added to the end of the program.
To overwrite the program
In the stop mode, press the MEMORY button repeatedly until
the program number to be changed appears on the display.
Select a new track number using the Skip button (.or/)
and then press the MEMORY button.
To clear program
To clear the programmed contents, press the MEMORY and
the STOP button (H) in the stop mode.
< If one of the following buttons is pressed, the programmed
contents will also be cleared:
FUNCTION, FM/AM, STANDBY/ON
< If the unit is disconnected from the power supply, the
programmed contents will be cleared.
19