Esoteric grandioso f1 Mode D'emploi page 11

Locknut B
When using banana plugs
Loosen locknut A and insert the plug into the opening in the end of
the terminal. Then, tighten locknut A.
o Keep locknut B tightened when using.
o Carefully read the instructions for the banana plugs that you are
using.
Notice about the European model
In accordance with European safety regulations, connecting
banana plugs to speaker terminals is not allowed on European
models. The holes into which banana plugs could be inserted
have been covered with black caps. Connect speakers using bare
wires or spade lugs. If a black cap should become separated from
its terminal, return it to its original position.
When using bare wires
Loosen locknut B and insert the core wire from the side. Then, tighten
locknut B.
o The hole for the insertion of the core wire is open on the left and
right sides.
Cross-section
o The maximum wire diameter that can be inserted is 4 mm (1/8").
Locknut A
When using spade lugs
Loosen locknut B and place the terminal wire from the top or bot-
tom. Then, tighten locknut B.
o When using a spade lug to connect, use one with an inside diam-
eter of at least 6 mm (1/4").
Terminal cross-section
6 mm (1/4")
or more
11