Product Overview; Automatic Filter Cleaning; Operating Modes - Schwarz JBS 1625 classe M Mode D'emploi

Product Overview

1 Handle
2 Extension pipe
3 Selector for hose diameter (air flow surveil-
lance)
4
Filter unit
5
Holding clamp
6 Power cord
7 Hose connection
8 Container
9 Hose connection cap
10 Hose
11 Latch
12 Lock of the latch
13 Operating mode selector
14 Tool socket
15 "Filter control" warning light
16 Filter unit hood
17 Fleece filter bag
18 PE collection bag
Selector for hose diameter
Set the selector 3 to the hose diameter in use.
The air flow surveillance releases a warning, if
the air flow falls below 20 m/s. Check for full
filter bag or collection bag and for reduced air
flow in hose or floor nozzle.
1 CONNECTING THE HOSE
Push the hose 10 onto the hose connec-
tion 7 with one of its noses pointing up-
wards and turn it clockwise.
Caution! Make sure the tool is
switched off and unplugged.
86 EN

Operating modes

Set the operating mode selector 13 to the desired
position:
0 Vacuum cleaner off, tool socket 14 live
I Vacuum cleaner switched on, socket 14 live,
automatic filter cleaning off
A Vacuum cleaner on standby, socket 14 live.
Cleaner operates while the connected power
tool is activated (10 sec. switch-off-delay),
filter cleaning off
RA Vacuum cleaner on standby, socket 14 live.
Cleaner operates while the connected power
tool is activated (10 sec. switch-off-delay),
automatic filter cleaning on

Automatic filter cleaning

A filter cleaning device can shake off accumu-
lated dust from the folded filter cassettes. The
filter cleaning is performed automatically during
the next working break after setting the operating
mode selector 13 to RA position. Set the operat-
ing mode selector 13 to RA at the latest when
the "Filter control"warning light 15 lights up, the
warning signal sounds or when the suction output
sinks.
2 SUCTION PERFORMANCE
Regulate suction with the handle 1:
Hartböden = hard floor coverings
Teppiche = carpeting
Polster = upholstery
Gardinen = curtains