ClearSounds Talk500ER V508 Mode D'emploi page 16

• Press to review more recent calls. The CALL# will decrease.
• After you view the most recent data in memory, the display will
show END OF LIST.
• Press to review older calls. The CALL# will increase.
• After you view the oldest data in memory, the display will show
END OF LIST.
• If the data in memory is being reviewed for the first time, the
NEW icon will be lit.
• The NEW CALL LED will turn off if you review the data.
NOTE: If no key is pressed within 20 seconds, the display will display
the total call counter, new call counter, current time and date.
Select the required Caller ID memory location by using the
or button.
To delete single memory, press DELETE button once. The display will
show the DELETE?. press DELETE button for 2 seconds. The data for
that call will be erased, and the CALL# and Caller ID information will
be updated.
-oR
To delete the entire memory, press and hold DELETE button until the
display shows DELETE ALL?. press DELETE for 2 seconds until NO CALLS
appears on the display. Both the total call and new call counters will
become zero, and the current time and date will be displayed.
Call Back (Redial) From The Caller ID Memory
With the handset hung up on the base.
• Select the required Caller ID memory location by pressing
• Press DIAL button, the speakerphone will turn on automatically
and dial the selected number.
-oR
Lift the handset or press the
memory location by pressing
Note: If the Caller ID number is 10 digits, press DIAL button once,
the unit will insert "1" before the Caller ID number automatically.
You can press
the speakerphone will turn on automatically and dial the displayed
number.
View the Caller ID Memory
Erase The Caller ID Memory
button to select insert "1" or not. Press DIAL again,
button, select the required Caller ID
or , then press DIAL button.
16 – ENGLISH
or .