Adjustment - Teac TASCAM TT-M1 Mode D'emploi

Vestax PDX-2000
Attach adapter V to mounting hole V on the back
of the base unit, and adapter T2 to mounting hole
T2 on the top surface. Install the TT-M1 by
inserting adapter V into the headshell stand and
placing adapter T2 on the dust cover holder.

Adjustment

Adjust the vertical and horizontal positions of the
TT-M1 as follows. Note that a record does not
have to be placed on the turntable.
1 Lower the roller onto the turntable.
Roller
2 Loosen the mounting screw.
Mounting
screw
3 Adjust the height so that the roller is posi-
tioned horizontally on the turntable.
Align these lines with each other.
4 Move the product to the left and right in
order to align the axis of the roller with the
center of the turntable. Use the guides at the
base of the roller.
Guide
5 When the product is properly adjusted, tight-
en the mounting screw securely.
Guide
English 3