Rds Functions - auna multimedia MD-210 BT Mode D'emploi

Press SEL repeatedly to select mono or stereo receiving mode.
Mono/Stereo
In each band, there are 6 station presets available (adding up to 30 presets). To save
the current station to one of the presets, select one band and then press and hold
Station storage
the desired num key until the station is saved.
Press and hold F/PS for about 3 seconds to start a automatic scan for available/
Automatic stati-
receptable stations. Received stations will automatically be saved to the available
on scan
presets (max 30).
Press LOC repeatedly to activate the LOC menu. Turn the vol knob to select LOC on
Local / DX
/ LOC off.
Press and hold MOD and BND at the same time for 3 seconds to delete all saved
RESET
stations and reset all changes.
Press and hold the Vol knob, to receive an optimal radio signal that will continuously
be compared to any other available frequencies. If there is another frequency availa-
AF
ble sending the same program, the device switches to this frequency automatically
to ensure unalloyd radio pleasure.
Press and hold TA to activate / deactivate the TA (=traffic announcement) mode.
When active, press and hold SEL for 2 seconds and choose between the available
TA
modes TA SEEK and TA ALARM by turning VOL.
Press and hold PTY to activate / deactivate PTY. You can choose from different pro-
gram types using the num keys. Double press PTY to emphasize language/news
PTY
oriented programs. Choose with 1-6 again.
Press and hold SEL until TA SEEK is displayed. Choose between long and short
Retune long/short
search intervals for the TA function by pressing SEL repeatedly.
The device is in pairing mode automatically. Just look for it in thelist of available BT
Pairing
devices on your smartphone / tablet and connect.
When makink a call, the hands free mode will be activated automatically and CALL
OUT will be shown on the display.
Making calls
Incoming calls are marked CALL IN. If answered, the display shows BT TALK. Adjust
the talk volume turning the vol knob.
When the car radio and your BT device are properly paired, music that you play on
Playing music
the BT device will be put out via the car stereo.

RDS Functions

BT
17