Warranty - IKA S 65 KD-G 65 G Mode D'emploi

D 60/80:


Disassemble the stator:
The assembly of the dispersion tool takes place in reverse sequence.
NOTICE
Spare parts order:
Spare parts diagram see front page.
For orders of spare parts please specify the serial number on the shaft tube, the type
of dispersion tool and the designation of the spare part.
Repair:
Please send dispersing tool for repair only after it has been cleaned and is
free from any materials which may constitute a health hazard.
For repair, please request the "Decontamination Certificate" form IKA
the download printout of it from IKA
If you require servicing, return the instrument in its original packaging. Storage pack-
aging is not sufficient. Please also use suitable transport packaging.
In accordance with IKA
under the warranty please contact your local dealer. You may also send the machine direct to
our works, enclosing the delivery invoice and giving reasons for the claim. You will be liable
for freight costs.
The warranty does not cover wearing parts, nor does it apply to faults resulting from improper
use or insufficient care and maintenance contrary to the instructions in this operating manual.
The rotor must not be tightened too strongly, otherwise the
thread will be damaged.

Warranty

warranty conditions, the warranty period is 24 months. For claims
®
Hold the dissolver with a wrench A/F of
17mm (SW17).

Hold the shaft with the rotor wrench at
the coupling section and unscrew the ro-

tor in counterclockwise.

Note: the user can also hold the shaft
with the pin of the rotor wrench and
unscrew the rotor with shaft wrench
(this procedure will be necessary if the

coupling (9) goes loose first.) or SW 17
(for D60/80).
Hold the shaft tube with hand.
Unscrew the stator in counterclock-
wise (left hand thread) with the hook
wrench.
website: www.ika.com.
®
or use
®
11