Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Source language: German
Explication of warning symbols
Safety instructions
DANGER
WARNING
CAUTION
NOTICE
CAUTION
• Read the operating instructions in full before starting up and follow the
safety instructions.
• Keep the operating instructions in a place where they can be accessed by everyone.
• Ensure that only trained staff work with the appliance.
• Follow the safety instructions, guidelines, occupational health and safety and ac-
cident prevention regulations.
WARNING
drive only starts when the tool is inside the vessel.
CAUTION
fore it can be removed from the drive.
NOTICE
the medium is hot, it can become extremely hot.
WARNING
NOTICE
solver touches the vessel wall. The dissolver tools must have a distance of minimum
100 mm from the vessel wall.
Content
Explication of warning symbols
Indicates an (extreme) hazardous situation, which, if not avoid-
ed, will result in death, serious injury.
Indicates a hazardous situation, which, if not avoided, can re-
sult in death, serious injury.
Indicates a potentially hazardous situation, which, if not avoid-
ed, can result in injury.
Indicates practices which, if not avoided, can result in equipment
damage.
Burns hazard!
Safety instructions
It is only allowed to use these tools on the drive T65 basic/
digital with the safety switch SI 400, which make sure that the
The dispersion tool may heats up during operation. In particular
in the processing of hot medium, the tool must be cooled be-
When in operation the dispersion tool can become hot. If the
dispersion tool is not inserted into the drive flange correctly or
Don't touch rotating parts during operation.
The vessel must be clamped, so that it cannot move during the
operation. The D 60 and D 80 can destroy the vessel if the dis-
EN
Page
8
8
9
9
9
10
10
11
12
8
Publicité
Chapitres
Table des Matières
